Spinner II® Products Spinner II® Products Spinner II® Products
Home | Contact Us | Tech Support | Careers | Sitemap |
Models and Specs
How The Centrifuge Works
Report: 50% Less Engine Wear
The Case For Extended Drains
Spinner CP™ Systems
CS Centrifuge/Screen Systems
Service Bulletins
Service Video: Model 596HE
Profit Builder Case Studies

Powerfully Effective

The Spinner II centrifuge is a highly efficient bypass filtration device.

It is typically powered only by engine oil pressure, although pump-assisted units are also available. The centrifuge operates at speeds in excess of 6,000 rpm, generating a force more than 2,000 times greater than gravity.

This force extracts solid contaminants from the fluid stream and deposits them on the inner wall of the cleanable rotor as a dense, solid cake.

Centrifuge Operation

1) Dirty oil enters the separation chamber under normal pressure, flowing up through a hollow spindle.

Oil passes through a spinning rotor where centrifugal force 2,000 times greater than gravity separates contaminants from the oil.

Contaminants accumulate on the rotor surface as a solid cake.

Clean oil exits through opposing, twin nozzles that power the centrifuge up to 4,000 rpm.

Clean oil returns to the sump/reservoir from the level control base.

Tel: (713) 682-3651 • Fax: (713) 682-1109 • Email: • PO Box 920946 • Houston, TX 77292
© 2000 - 2021 Spinner II® Products. All rights reserved. Experiencing technical difficulties?